{"product_id":"malco-fsxc2-power-assisted-standing-seam-cutter-1-5-or-2-standing-seam-copy","title":"Malco FSPC Standing Seam Panel Cutter - Drill-Powered Metal Roofing Panel Slitter","description":"\u003cp\u003eThe \u003cstrong\u003eMalco FSPC Standing Seam Panel Cutter\u003c\/strong\u003e provides a fast, precise way to rip standing seam metal roofing panels while producing a clean edge on both sides of the cut. Unlike cutting methods that leave a scrap side, the FSPC uses smooth slitting wheels so both sections of the panel can remain usable.\u003c\/p\u003e\n\n\u003cp\u003eDesigned for standing seam panels with ribs 1\" or taller, the FSPC features polymer drive wheels that advance the tool through the panel while helping protect painted finishes. An adjustable fence indexes directly from either panel rib, with interchangeable 8\" and 16\" rails for straight, repeatable cuts without the need to snap a chalk line. The cutter can also be used without the fence for ripping flat sections of R-panel and similar profiles.\u003c\/p\u003e\n\n\u003cp\u003ePowered by a compatible lithium-ion cordless drill, the FSPC can cut at speeds up to 75 feet per minute. Replaceable cutting discs and drive wheels help extend the life of the tool, and the complete system is supplied in an IP67-rated hard case for protection during transport and storage.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast Cutting:\u003c\/strong\u003e Rip cuts panels at speeds up to 75 ft.\/min.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean Cut on Both Sides:\u003c\/strong\u003e Smooth slitting wheels leave clean edges so both halves of the panel remain usable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Fence:\u003c\/strong\u003e Indexes from either panel rib for straight, repeatable cuts without snapping a chalk line.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8\" \u0026amp; 16\" Fence Rails:\u003c\/strong\u003e Interchangeable rails accommodate different cut widths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish-Friendly Drive Wheels:\u003c\/strong\u003e Polymer wheels advance the cutter while helping protect painted panel finishes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuts From Either Side:\u003c\/strong\u003e Allows the tool to be positioned from either side of the panel for greater flexibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable Wear Components:\u003c\/strong\u003e Cutting discs and drive wheels can be replaced to extend tool service life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67-Rated Hard Case:\u003c\/strong\u003e Protects the cutter and components during transport and storage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMaterial Capacity\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePainted steel: up to 24 gauge\u003c\/li\u003e\n\u003cli\u003eStainless steel: up to 26 gauge\u003c\/li\u003e\n\u003cli\u003eCopper: up to .032\"\u003c\/li\u003e\n\u003cli\u003eZinc: up to .032\"\u003c\/li\u003e\n\u003cli\u003eAluminum: up to .032\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePanel Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for rip cutting standing seam roofing panels with seams 1\" or taller\u003c\/li\u003e\n\u003cli\u003eAdjustable fence indexes from either panel rib\u003c\/li\u003e\n\u003cli\u003eCan be used without the fence for ripping flat sections of R-panel and similar profiles\u003c\/li\u003e\n\u003cli\u003eNot intended for cutting across corrugated panels or profiles with peaks and valleys\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDrill Requirements\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLithium-ion cordless drill\u003c\/li\u003e\n\u003cli\u003eMinimum torque: 45 ft-lb\u003c\/li\u003e\n\u003cli\u003eMaximum operating speed: 500 RPM\u003c\/li\u003e\n\u003cli\u003eUse the drill's lowest speed setting for maximum control and torque\u003c\/li\u003e\n\u003cli\u003eDo not exceed 500 RPM\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Malco","offers":[{"title":"Default Title","offer_id":67637903065266,"sku":"70001807","price":1605.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2540\/2290\/files\/malco-fspc-1.png?v=1791229443","url":"https:\/\/rapidmaterials.com\/products\/malco-fsxc2-power-assisted-standing-seam-cutter-1-5-or-2-standing-seam-copy","provider":"RapidMaterials","version":"1.0","type":"link"}