The solar panel is becoming an increasingly popular form of alternative energy around the world, using photo-voltaic and silicon solar cells to convert radiation into power. Along with this increase in popularity, S-5-PV kits and attachment clamps are in high demand as an industry standard for solar mounting systems on metal roofs. S-5! Attachments lower the installation costs, and simplify the process with module-to-module (bonding) continuity.
To install a solar panel on a metal roof you will need 3 basic components: solar panels, S-5! clamps, and the S-5! EdgeGrab 2.0 (for single panels) or the S-5! MidGrab 2.0 (for multiple panels). You will also require a screw gun, tape measure, wrench, and a pen.
For this application, we are using S-5-V mini clamps.
Install the Clamps
Mark your starting point using a pen and apply the first two S-5! clamps using a screw gun. The torque should be between 135 and 175 inch / lbs.
Once the clamps are firmly in place, add the mounting disk and set your EdgeGrab (or MidGrab) until snug. Tighten with a wrench.
Attach the Solar Panel
Place the solar module in alignment with the first two clamps and mark the position of the additional clamps.
Preassemble the additional S-5-V mini clamps with the mounting disks and EdgeGrab 2.0’s, and repeat the previous steps to secure in place with the screw gun. Finally, tighten the top screws on each of the four S-5! EdgeGrab 2.0’s. Your solar module is now secured in place.