An integral part of the S-5!® ColorGard® 2.0 system is the ColorGard 2.0 cross-member. After installing S-5!® seam clamps on the metal roof panel seams, the ColorGard cross-member attached with the use of VersaClip adapters to the S-5!® clamps. ColorGard 2.0-Un-punched. This 7′-8″ cross-member should be used anytime the panel width is not divisible by 4, or when running ColorGard on angles (up valleys, etc). When using the ColorGard 2.0-Un-punched, the Versa-Clip adapter is required for each clamp to cross-member connection.  IMPORTANT: While most applications will require a single row of snow retention with an S-5!? clamp on every panel seam, we always recommend you contact us with your project information and allow to us to perform the calculations necessary to ensure a permanent snow retention system. There is no charge for this. Learn more about ColorGard 2.0 installation S-5! mini seam clamps should never be used with ColorGard 2.0. These S-5 clamps are suitable for use with ColorGard 2.0:

• S-5-E
• S-5-H
• S-5-H90
• S-5-K Grip
• S-5-N 1.5
• S-5-N
• S-5-Q
• S-5-R465
• S-5-S
• S-5-T
• S-5-U
• S-5-V
• S-5-Z

These S-5 Brackets are suitable for use with ColorGard 2.0:

• Corrubracket
• Corrubracket 100T
• VersaBracket VB-47
• VersaBracket VB-67